Posted on

AIO Robotics Zeus All In One 3D Printer Review

This AIO Robotics Zeus All In One 3D Printer is one of the few with 3D Scanning and 3D Printing capabilities together. A single button press enables users to scan, print and reproduce 3D objects.

AIO Robotics Zeus All In One 3D Printer is the first 3D printing and 3D scanning machine that introduced powerful built-in computer. AIO Robotics Zeus All In One 3D Printer is also leading the introduction of applications on the device.

[youtube https://www.youtube.com/watch?v=cS2IZzQK2Eg]

Zeus AIO Robotics

AIO Robotics Zeus All In One 3D Printer

Zeus AIO Robotics is a high-tech startup that targets the 3D printer business with innovative All-In-One 3D devices.  By automating the procedure of 3D scanning services and 3D printing, the products shall make this technology accessible to everyone.

The mission is to bring 3D Printers into small businesses, schools, and households by making 3D printing as easy as 2D printing. AIO Robotics founded in 2013 in the heart of Silicon Valley.

The mission or idea with this particular 3D Printer or 3D Scanner was to create a ‘stand-alone’ and ready-to-use device. That is critical to people starting in this new 3D world. Besides, due to its high precision, accuracy, and features, advanced users also congratulate this 3D machine.

AIO Robotics Facebook page here. One interesting fact is that AIO regularly creates new applications to the 3D Device. That is why you will receive constant upgrades and new features. The software is an essential tool in a 3D Printer and a 3D Scanner, so that will help a lot!

AIO Robotics Zeus All In One 3D Printer Features

AIO Robotics Zeus All In One 3D Printer

  • Automatic calibration and bed leveling guarantees perfect 3D prints and 3D scans.
  • Multicolor 3D Printing (you can quickly change color filaments)
  • Mount Dimensions: 8.0 x 6.0 x 5.7″.
  • 80 Micron Resolution.
  • Fax sending option.
  • Study Volume: 5″ Height x 9″ Broadness.
  • Detachable Extruder & Turntable.
  • Onboard Figure Watcher, Editor, & Slicer. You can customize your 3D Scans directly on the touch-screen.
  • USB and Internet Data Transfer.
  • PLA Filament Supported.
  • 7-inch Full Color Touchscreen.
  • Standalone – No PC Requisite.
  • Plug-and-Play ready in ten minutes.
  • Internet-Enabled (wifi or cable).
  • 3D Scan Technology: cutting edge laser triangulation technology.

AIO Robotics Zeus All In One 3D Printer Review

 

AIO Robotics Zeus All In One 3D PrinterThe AIO Robotics ZEUS All-in-One 3D Printer, Scanner, Copier, & Fax.

You are in front of one of the few, and unique 3D Devices that comprises a 3D Scan and onboard 3D Software included with the 3D Printer.

Most of the 3D printers available in the market do not come with 3D Scanning capabilities. Built-In 3D Software it is also an excellent feature. Also, with this 3D software, you can modify your 3D prints just after the 3D scanning process.

3D Scans

The Laser Triangulation Technology will allow you to 3D Scan your models with high accuracy.

3D Prints

Automated calibration, and bed-leveling permit you to quickly and efficiently create your 3D Models. You can use compatible PLA filaments or the eco-friendly and several others that provide AIO Robotics.

[youtube https://www.youtube.com/watch?v=VxkYMfell6E]

Filament

  • ExcelFil Snow White PLA 1.75mm.
  • Loading the filament is relatively easy.

Software

AIO Robotics Zeus All In One 3D Printer

The 3D Printer / 3D Scanner is ‘plug and play’. You do not need to install any software.

The touch display is easy to understand. The OS is a standard Ubuntu running on the ARM Board.

They continuously fix bugs and add new features. You can report them any bug, and they will be happy to solve.

AIO Robotics Zeus All In One 3D Printer connects to the internet. You can download any 3D CAD models from different repositories for 3D printing.

Maintenance

Zeus Company developed all the modeling parts of the AIO Robotics Zeus compactly so they are easy to bring out for cleaning.

On-Board Functionality

Built-In Search

  • Obtain 3D Models from on-line Databases.
  • ZEUS joined to MyMiniFactory and Thingiverse.
  • Directly Download (at the touch of a button), Modify, and 3D Print on the AIO Robotics Zeus All In One 3D Printer.

Combined Design Editor

  • Onboard Style STL files (and many other formats OBJ PLY etc.) before Slicing.
  • Scale, Stretch and Turn your 3D Design.
  • Combine many 3D Prints to one Printing Method.

Troubleshooting

Zeus Company wisely includes ways that will help you if you have any problem. They include a reporting feature (one touch button) where you can report any issue directly to Zeus engineers. The engineers usually reply fast and in an accurate manner. Besides, both the extruder and turntable are easily removable, allowing minimal downtime if a problem happens.

Other questions

Can you 3D print to the AIO Robotics Zeus All In One 3D Printer with Solidworks?

AIO Robotics Zeus All In One 3D Printer

The AIO Robotics Zeus All In One 3D Printer is open source. That is the reason why you can use Solidworks, Google Sketchup, and other 3D Softwares. The are also 3D Conversion utilities that can convert your STL files to any other file formats.

Then you can use any 3D Software on the market by using the file formats they require. STL file format is the format the AIO Robotics 3D Printer uses.

Which materials can I 3D Print with this 3D Device?

AIO Robotics Zeus 3D Printer prints in PLA plastics. Some people reported that they used PETG and Wood composite PLA filament and it worked as well.

AIO Robotics Zeus All In One 3D Printer Conclusion

AIO Robotics Zeus All In One 3D Printer

3D printers can be as cheaply as $200 and 3D scanners the about the same price. But increasing the features and details of those together getting them to interact properly is hard. In addition, allowing to transfer and modify the 3D files are definitely a very good option.

The AIO Robotics Zeus 3D Printer is expensive, but it has a complete lot of features. You are for certain obtaining something to pay out its cost.

Its verdicts are remarkably, and the additional built-in 3D Scanning device is pretty comparable to the MakerBot Digitizer. I would assert that this price is typically low. If you desire a 3D Printer fused with a 3D Scanner and you need to have incredible 3D prints, this is the first to consider.

AIO Robotics Zeus All In One 3D Printer

Finally, the AIO Robotics Zeus All In One 3D Printer is one of the most trustworthy 3D Printer. Compared to commercial printers, it works very well.

The 3D device has a lower accuracy compared to much more expensive 3D Printers and 3D Scanners, but it is inexpensive to operate. Finally, customer service is excellent. Remarkable features are its durability and overall effectiveness.

[youtube https://www.youtube.com/watch?v=Ctm-hu9hvb0]

Posted on

iSense 3D Scanner Review

This is the iSense 3D Scanner Review. There are several models available depending on which dispositive you attach the iSense 3D Scanner. The three possibilities are iPad Mini, iPad Air, iPad Air 2 and iPhone. We will cover all of them in the next paragraphs. We review all the iPad options in the same section since all of them have the same features.

iSense 3D Scanner for iPad

The Cube iSense 3D Scanner optimized settings let you efficiently capture items of sizes, up to 10 feet. As exterior light can decrease the quality of the scanned models, the iSense is for indoor use. Even though it won’t have the ability to get any color information the 3D scanner also can work in complete darkness.

[youtube https://youtu.be/aTLC4qfOHio]

Items that are closer will be 3D scanned with increased detail than things farther away. If you get too close to an item your display will turn white and alert you that the iSense is not able to get any picture info.

Using various editing tools, you can prepare, correct, prepare and upload you 3D model in a 3D file.

To use the 3d systems iSense 3d scanner for iPad 4g out of your iPad, download the free iSense software from Cubify.com. This 3D program gives you various editing tools that can allow you to improve, crop, and solidify your 3D scans, and prepare them. Later, upload them directly at home to your own Block printer, from wherever you happen to be or send them.

The 3D Systems iSense 3D Scanner contains a cable that connects the 3D scanner to the iPad. In a near future, smartphones and tablets will incorporate those 3D Sensors or 3D Scanners. While waiting for that we have to use those cables.

The cable uses micro-USB ports that are quite useful and interoperative.

 

iSense 3D Scanner for iPad Technology and Software

Image result for iSense 3D Scanner for iPad

The iSense 3D Scanner for iPad Pro or any other iPad version uses an infrared Class I laser projector. The iSense 3D Scanner iPad has some security measures that shuts down the laser if it detects any problem.

We can say that one of the most important factors when looking for a cheap 3D Scanner is its accuracy and hardware. The software is also a very important factor of any 3D Scanner.

Moreover, you can always upgrade or improve the software while the accuracy and hardware is fixed for always. The iSense 3D scanner for iPad Air extracts specific targets from active backgrounds, letting you zero into the things you would like to get.

One of the interesting features of the iSense 3D scanner for iPad Air software is that it extracts specific targets from backgrounds, letting you focus on the things you want to 3D Scan. Another of the iSense applications is that they let you choose and change settings like frame rate, resolution, color, item size, object recognition, and much more.

Furthermore, if you want to modify your 3D files for additional exploitation, then just export your 3D file to the CAD applications of Cubify, like Cubify Sculptor any other 3D Software.

[youtube https://www.youtube.com/watch?v=KO8YWESlEfI]

iSense 3D Scanner for iPhone

Image result for iSense 3D Scanner for iPhone 6 KitAttached to an iPhone, the iSense 3D Scanner for iPhone 6 Kit it could quickly slip right into a pocket, which makes it suitable for on the road scan.

Nevertheless, it’s many limits. Its capability to record detail is poor, plus it fights in some lighting conditions.

An advantage can be its price. You can get it on Amazon for around 100$.

In the event that you would like to create 3D scans of pets, family, friends, as well as the uneven statue, do it now, but I believe the price overwhelms the utility of the apparatus for the majority of users.

[youtube https://youtu.be/G0614Y6kYI8]

Posted on

Best 3D Scanner Under $1000

In this article, you can find your Best 3D Scanner Under $1000. That 3D Scanner selection varies depending on your personal or institutional needs. It is not necessary to pay a high price for a high-quality Best 3D Scanner Under $1000. You can easily find the latest Best 3D Scanner for less than $1000, as long as you know where to look. Here you can get the list of the Best 3D Scanner Under $1000.

[youtube https://www.youtube.com/watch?v=yeyNmYM9QJY]

Rubicon 3D Scanner

Best 3D Scanner Under $1000You will get a powerful 3D Scanner along with a good price if you choose this brand. After you buy the Best 3D Scanner, you will notice you will turn any item into a 3D virtual model right away. The product has a 0.1 mm precision and resolution.

 

Matterform 3D Scanner

Best 3D Scanner Under $1000

A benefit of this 3D Scanner is its ability to be connected to a 3D printer. The item also works well with 3D printing services. It doesn’t matter what kind of printer you use, and you will still be able to create amazing 3D digital objects. As a plus, the product can scan large models with a 7-inch diameter, which is uncommon for a scanner.

3D Systems Sense 3D Scanner

Best 3D Scanner Under $1000

“Sense 3D” is a product that takes things to a new level and designed for 3D printers. The item includes an adjustable scan size, this feature giving it the ability to capture everything.

Regardless if you need an amazing looking cake or a full shot of your pet, the 3D Systems Sense 3D Scanner is sure to deliver. Furthermore, this neat Best 3D Scanner can do data processing in just a few secs, unlike many other similar devices on the market.

MakerBot Digitizer 3D Scanner

Best 3D Scanner Under $1000

The Digitizer is another reliable Best 3D Scanner device for people who need the latest features for an affordable price. The 3D Scanner provides a 2 mm precision, and a 0.5mm resolution. MakerBot also works with any operating system.

Robocular 3D Scanner

Best 3D Scanner Under $1000This scanner’s strength lays in its low price but high specs. If you use Robocular, you will be able to create 3D objects from any item you encounter during your day. This electronic device features some cool specs, including optional features for the 3D scanning, a high quality and flexible camera, and a focused laser with a green light for improved object view.

Free Sculpt EX1-ScanCopy 3D Scanner

Best 3D Scanner Under $1000

The Free Sculpt 3D product comes included in the full version of the EX1 printer. People who used it gave it a high rating because it allows you to scan and print simultaneously by using the EX-1 feature. Free Sculpt 3D works with both Windows and Mac operating systems.

Occipital Structure Sensor 3D Scanner

Best 3D Scanner Under $1000

This scanner lives up to its name. The Occipital Structure Sensor is the perfect accessory for your tablet, due to its ability to add some useful features to your iPad’s. Kickstarter backs the scanner and is one of the most modern 3D scanners at the time.

The device includes a camera that you can just place on the back of your tablet. When the bracket is set on, you can even measure how far the objects you want capturing are. You can then turn these regular objects into 3D while always being aware of how far they are located in the room.

David Laserscanner 3D Scanner

Best 3D Scanner Under $1000

The second version of this scanner adds some extra features to the device for a quite satisfying price. It pretty much comes packed with anything you need in a 3D scanner. For it to work, only sweep the laser over the object and it will be turned into 3D straight away.

 

[youtube https://www.youtube.com/watch?v=LYfaRFfG4Ho]

Best 3D Scanner Under $1000 – More Resources

Fin more Best 3D Scanner Under $1000 by searching at amazon or google.

You can also check great reviews and information at Think3D:

http://www.think3d.in/3d-scanning-services-india/

http://www.think3d.in/3d-printer-shop/buy-3d-scanners-in-india/

Other websites

3ders published the best 3D Scanner guide some years ago and is still quite useful.

Aniwaa published a more recent article with ten reviews.
Pinshape recently updated its resources with some new interesting facts.
Quora usually reviews and published interesting 3D Scanning details.
Posted on

Duplicator 4 3D Printer Review

Introduction Duplicator 4 3D Printer Review

This Duplicator 4X 3D Printer Is a fourth generation 3D printer. The 3D Printer is manufactured by Duplicator Wanhao, a 3D printer company that started in 2011. In addition, they develop the Duplicator 4X 3D Printer for both entry level and professional makers. Read this Duplicator 4 3D Printer Review and find out.

Duplicator Features

Measures, precision, and material Duplicator 4 3D Printer Review

The Duplicator 4 3D Printer equips with the first dedicated 1.75 mm filament extruder. It measures 12.6″ x 18.4″ x 15″ and weighs 32lbs when shipped. It has a precision ground of 8mm shafts.

[youtube https://youtu.be/yPhRajw4aK8]

The Duplicator 4 uses a single-piece motherboard with five-axis and 1/16 micro-stepping control. The 3D printer is available in acrylic, black acrylic, and woodgrain. The chassis made from a high-quality, dense plastic plate that is very durable. Continue reading the Duplicator 4 3D Printer Review.

Self-calibration and alignment Duplicator Wanhao

Duplicator 4X 3D PrinterWhen you connect the USB cable to print, it will automatically perform self-calibration and starts printing. Thanks to the linear shafts, any wobble on the Z axis will eliminate, and it will result in a better alignment of the layers. The improved layer arrangement produces crystal clear prints.

LCD control and Software

Duplicator 4X 3D Printer

It has an LCD screen display for easier printing setup and a multi-direction control pad for quick navigation. The Piezoelectric buzzer notifies you if the printing process finishes. It uses open source 3D printer software called ReplicatorG that is compatible with Linux, Mac, and Windows. ReplicatorG can download for free, and it has a feature that allows you to position STL files quickly.

 

Dual extruders

Duplicator 4 3D Printer Review

It has a dual-head printer that enables you to print two colors at the same time. There is also a built-in spool holder that locates at the back that allows you to mount 1kg rolls of plastic filament that will automatically feed into the extruders. The software screen and the printer’s LCD screen thermostatically control and monitor the extruders and built plate.

SD Card Reader

[youtube https://www.youtube.com/watch?v=WkfnWmytVas]

First of all, as this Duplicator 4 3D Printer Review explain, you can also print directly from the printer without connecting it to the computer because it has a built-in SD card reader. In addition, when you use ReplicatorG, the STL files can be converted to .X3G to be able to print it directly on the SD card. Finally, the overall build area is 8.9” x 5.7” x 5.9” and it’s big enough to make a 5-liter object.

Layer thickness

Duplicator Wanhao

The layer thickness can be adjusted from 0.1 to 0.5 by using printer software, and the nozzle size is 0.4 mm with a speed of 40 mm/s. The flow rate of Duplicator 4X 3D Printer is 24cc/hr, and the recommended temperature for the extruder should not exceed 230 degrees Celsius. Furthermore, it also has a heated build platform which can handle up to 120 degrees Celsius maximum heat.

Precision Duplicator Wanhao

Duplicator 4X 3D Printer

Positioning precision in the Z axis is 2.5 micron and on the X and Y axis is 11 micron. It is compatible with many types of plastic filament including ABS, PLA, Rubber, Nylon Laywoo-D3, LayBrick, and BendLay. The filament size is 1.75mm. Noteworthy, it uses Fused Filament Fabrication (FFF) together with Thermoplastic Extrusion to construct the model. In the box, you’ll find a power cord, USB cable, SD card and two rolls of ABS filament.

Conclusion Duplicator 4 3D Printer Review

In conclusion, this Duplicator 4X 3D Printer offers the latest technology and gives you a ton of features for its price range. Moreover, this 3D Printer is, without a doubt, one of the best 3D printers available in the market. Online testimonials abound with pleasant surprise at the cost. If you want to read more reviews like this Duplicator 4 3D Printer Review then click here.

[youtube https://www.youtube.com/watch?v=_T8HdmqH8Jo]

Posted on

Prusa i3 3D Printer Review

In this Prusa 3D Printer Review, we show this Prusa i3 3D Printer For Sale (the Prusa i3) by Josef Prusa. You can consider this Prusa i3 3D Printer as a special Pack for Dummies and probably the best Prusa i3 kit. That is because it is easy to use and the Prusa i3 quality is high. The three main qualities in the Prusa i3 3D Printer are:

  • Affordable price.
  • Good quality.
  • Be easy to set up.

prusa i3 quality

The Prusa i3 is the most popular desktop 3D printer in the world, according to 3D Hubs. And that’s not because they’ve been commercially successful, but because the open source design has been distributed and copied a billion times over.

In addition to advancing the cause of humanity, one 3D print at a time, Czech inventor Josef Prusa has also been selling DIY kits and fully built and calibrated printers through his company, Prusa Research.

“We decided to push it even further,” says Prusa. “This is not just a simple upgrade. This is a new generation with entirely new or highly upgraded features. We’ve created the ultimate i3 design.”

New Features for the Original Prusa i3 MK2

Original Prusa i3 MK2 3D PrinterAmong several notable additions to the MK2 is a new heated which uses three power zones, where corners are made slightly warmer than the center space to create a “warm air shield” to minimize warping.

They’ve also updated their print surface, replacing the glass with Ultem PEI, and better insulating the bottom by upping the heated substrate to 3mm in thickness.

 

The build volume is also a whopping 31% larger, capable of 250 x 210 x 200 mm.

Existing owners of the Original Prusa i3 can also upgrade their printers to the MK2, rather than being forced to buy an entirely new one.

Those technical specs in full:

  • 31% bigger build volume – 10500 cm3 (25 x 21 x 20 cm or-or 9,84 x 8,3 x 8 in).
  • Open frame design for easy use.
  • Integrated LCD and SD card controller (8GB included).
  • Up to 40% faster-printing thanks to the genuine E3D V6 Full hotel.
  • 0,4mm nozzle (easily changeable) for 1,75 mm filament.
  • Layer height from 50 microns.
  • Automatic mesh bed leveling.
  • Heated with cold corners compensation – for wireless 3D printing from any material.
  • Hassle free PEI print surface – no glass, no glue, no ABS juice.
  • Supported materials – PLA, ABS, PET, HIPS, Flex PP, Ninjaflex, Laywood, Laybrick, Nylon, Bamboo fills, Bronzeville, ASA, T-Glass, Carbon-fibers enhanced filaments, Polycarbonates…
  • Easy multicolor printing.
  • 1 kg (2 lbs) PLA filament included.
  • Average power consumption 70 W (printing PLA) or 100 W (printing ABS), exterior dimensions 42 x 42 x 38 cm (16.5 x 16.5 x 15 inches), weight 6,5 kg (14 lbs), CE certification.
  • Specially optimized firmware for quiet printing.

[youtube https://www.youtube.com/watch?v=JqH41K2vq0g]

If you want to profit of this new Prusa i3 3D Printer, you can buy it on Amazon. This is an excellent alternative but read carefully first this Prusa 3D Printer Review. You need to know what you are looking for before making a purchase decision. What are your main needs?

[youtube https://youtu.be/id90y5fkirE]

This Prusa i3 3D Printer is one of the cheapest Prusa i3 kit configured in partnership with a Chinese manufacturer, Shenzhen S. Electronics Co. They specialize in electronics and 3D printing distribution. This Prusa 3D Printer Review will review the main features to match your needs.

What have this Prusa i3 Kit to be so special?

Prusa i3 3D Printer

As you know, the primary goal of most 3D printer companies and 3D Scanners companies is to get to know everybody in the 3D manufacturing world. So, one of the main concerns is to get a good price.

Personal Opinion Prusa 3D Printer Review

In our personal opinion in this Prusa 3D Printer Review, the company making the Prusa i3 3D Printer has done an excellent negotiation with providers and has obtained a fantastic price regarding the quality of the product. But, you cannot forget quality in the essential pieces is crucial in this printer.

[youtube https://www.youtube.com/watch?v=zo-lpA_asNY]

Best quality in the critical parts of the Prusa i3 Kit branding by Josef Prusa. Prusa i3 is a demonstrated configuration with several thousand clients all around the planet.

prusa 3d printer review

The full metal hot end inside this model is one of the best of the market. For an excellent extrusion of filament, we need a great hot end. It ensures proper addition of material and, with a good fan, this full metal hot end ensure excellent quality of 3D printed pieces.

All parts of this 3D printer are Open Source and are a piece of the RepRap venture. In most cases, the main problem is not the extruder itself but its weight. The reason is that it could produce high inertia forces with movement and it cause printing errors. We have chosen the option for the essential piece of the 3D printer.

best prusa i3 kitIt is the forgotten piece by regarding quality. The truth is that a proper cooling is necessary to be sure that the hot end jets the filament gently and smoothly. In addition, it has an integrated LCD for use without a PC.

Pruse provides this to you on this 3D Printer pack. Whit this perfectly adapted LCD you can interface with your 3D printer and get information about its status.

Why should you choose this Prusa i3 Kit?

As you know, Prusa specializes in offering the best 3D printers information and best Prusa i3 kits. It also aims to get everybody learn how to 3D Printing. These are the main reasons to chose this Prusa i3 pack that Josef’s offer you.

Integrity Prusa i3 3D Printer

This is perfect to start with a 3D printer for an affordable price. The company provides an exclusive after-sell service in collaboration with manufacturing partners. If you have any problem, you can easily contact them and they will do everything to solve your problem. Moreover, if you need models to start on 3D printing you can check 3D Scanners to create your own 3D Parts.

Completeness Prusa i3 Review

prusa i3 review

Many people get their 3D printers buying piece par piece and assembling them. It is a huge mistake for beginners because pieces never fit or produce a lot of problems or low quality of final products. This pack is completely integrated (all tools and correct prusa i3 quality pieces).

Warranty Prusa i3 Quality

You have 6 months of warranty for this 3D printer for sale. The first 6 months, if under a correct operation any part of your Prusa i3 is broken down, they will replace them. This is not usual as the Prusa i3 quality is enough. This pack comes with all tools, pieces, and software able to set up your 3D printer and start to 3D printing.

FREE shipment Best Prusa i3 kit

Prusa sends this best Prusa i3 kit around the world by free.

Conclusion Prusa i3 Review

This offer is the perfect kit to set up it and start with 3D printing. You can find many other choices. Nevertheless, if you are looking for quality of the parts and good outcomes then this is your choice.

[youtube https://www.youtube.com/watch?v=luhe4Nm8g-w]

Posted on

BQ Ciclop 3D Scanner Review

The BQ Ciclop is a 3D scanner in a collection designed by BQ, a company based in Spain. BQ is distinguished for its spectrum of electronics commodities, from smartphone and pads to 3D printers and 3D scanners. This BQ Ciclop 3D Scanner Review reviews the most important details of this 3D Scanner.

[youtube https://www.youtube.com/watch?v=DpR5bwA7BjY]

Firstly, Ciclop designed the BQ Ciclop 3D Scanner to be a free source and reasonable. Both the hardware and it operating software called Horus are under a CC-BY-SA and GPL license.

ciclop 3d scanner review

Secondly, the BQ Ciclop is a Kit which practices approximately 1 hour to model parts. This low-cost 3D scanner uses the laser triangulation technology to 3D scan objects positioned on its automatic rotating table. The frame of the Ciclop comes from 3D printed PLA parts, produced by 3D printers (such as the With box and Hephestos).

Thirdly, a cheaper version of the BQCiclop is available with electronic parts only. Also, note in this BQ Ciclop 3D Scanner Review that several maker’s projects reused these 3D scanner components and design for developing their hardware.

Assembly BQ Ciclop 3D Scanner Review

ciclop 3d scanner review

The BQ Ciplop 3D Scanner comes with a kit and requires assembly. Instructions are impersonated so it should not take long. In the past, these products had trouble taking off because of setup complications, but now that’s no longer going to be an effect since the Ciclop organizes with a comfort of use in memory. Apart from including all the components, the guidance outlines out step by step for the easy recommendation. The threaded bars, washers, and bolts are well-made, with the rods on the huge side.

The calibration objective on the BQ is right on the mark and should not cause any trouble during assembly. The openings are in position, and the base friction holds the unit in place while you’re using it.

Ability and Design

3D Scanner for 3D Printer

ciclop 3d scanner review

If this is your beginning time to use a 3D scanner, please consider the time to discover how the software and hardware operates. Utmost of the criticisms are the consequence of not studying how the software functions. If the materials or scans don’t come out right, you need to make adjustments to the calibration, light intensity and sources.

The overall design is excellent, and the Ciclop made well the components. Apparently, the only thing you can complain about here is the requirement to download the software package. Nevertheless, if you have a regular Internet connection, it shouldn’t be a crisis. As long as you understand how to use a program like Meshlab or similar, you’ll be able to assume the point cloud or any 3D features.

3D Laser Scanner for Sale

ciclop 3d scanner review

While it is open source, the power is on par with more expensive scanners acknowledgments to its use of those high 3D rotational laser triangulation tech. Essentially what this product does is activate two lasers on an object to obtain its texture and geometry. As the table turns, the unit can scan the object wholly.

One of the reasons this scanner is so promising is its great reference environment: there is now an entire community working together to improve its performance and improve the technology.

The Horus software runs smoothly, and since it is open source, there is substantial assistance. Beside its interface, you can calibrate the Ciclop, look at the point clouds that it produces and tweak camera exposure.

Make a 3D Laser Scanner

ciclop 3d scanner review

The hardware and software communicate via multiple workbenches. The first is for examining the elements like the LDR, engine, lasers, and camera. The following is for calibrating the scanner, and the third is for scanning. What presents this one of the best 3D scanners for the funds is that it’s a DIY unit but doesn’t have the weaknesses that other hand-operated 3D scanners have.

The difficulty with most DIY scanners is once the hand-operated setup finishes, the positions of the elements of the outcome differ, and this is what initiates calibration complex. With the Ciclop all of these are estimated by the system. When you fix this unit up, the internal scanner settings are measured using the arrangement set you defined. What all this suggests is the calibration process is correct whenever you scan.

Specifications BQ Ciclop 3D Scanner Review

Ciclop belongs to desktop 3D scanners, which can not match with industrial standard scanners, and it’s not suitable for scanning random and complex objects, only examine a nearly cylindrical object, the effect will be more ideal, there are lots of factors impact scan result. Like scanned objects, environment, and light.

[youtube https://www.youtube.com/watch?v=Sysbp0mzn8o]

There is a big relationship between them, so we recommend you 3D scan in Constant Light Studio.

  • Scanning results will be better.
  • The surface of injection making synthetic parts is more stable and clean.
  • Compared with printed plastic parts, you don’t want to fix it.
  • It is more durable than plastic parts.
  • It is easier to install.
  • You’ll be able to stable the board on this plastic parts.

Package Included

  • 1*Arduino UNO controller.
  • 1*ZUM Scan Expansion board.
  • 1*A4988 stepper drive chip.
  • 1* 720 HD camera.
  • 2*Laser.
  • 1* 42 stepper motor.
  • 1*16014 bearing.
  • 1*12V, 2A adapter.
  • 1*200mm acrylic chassis.
  • 1*200mm Non-slip mat.
  • 1*acrylic Calibration board.
  • 1*standard sticker.
  • 1*black Winding tape.
  • 6*mats.
  • 2*M8*400mm screw.
  • 4*M8*170mm screw.
  • 1*M8*292mm screw.
  • 10*M3*10 screw.
  • 10*M3 nut.

Product Features

ciclop 3d scanner review

Ciclop is a 3D rotational laser scanner; it accomplishes two lasers protruded above an object to capture the geometry and texture as it turns on a turntable. You can show your 3D parts to the 3D scanning open source community and contribute to the development of 3D scanning technology with the Ciclop.

The ZUM BT-328 board, based on ArduinoTM, involves enhancements and advantageous characteristics than other similar boards, which make it the best option for expanding electronics projects. ZUM BT-328 executes the control firmware of the motor and the lasers. A close inspection of the design also exhibits the ZUM SCAN is secured up to the top of the scanner. ZUM SCAN, a shield derived from Arduino Shield.

ciclop 3d scanner review

Ciclop has been making a detailed drawing of it with the settings method in mind. The kit comprises all the necessary items and a step-by-step construction guide, enabling you to set it up in less than an hour.

It is a desktop 3D scanner and is not just affordable but versatile as well. Unlike other 3D scanners, both the software and electronics design for the Ciclop are under the GPL and CC-BY-SA licenses.

This scanner utilizes the latest in laser technology to do a 3D scanning of the object that sets on its table; that revolves automatically. A friendlier attitude at the scanner shows the frame manufactures out of 3D printed PLA plants.

Availability

ciclop 3d scanner review

This scanner is available in an indeed further off inexpensive portable version with just the electronic components. As this BQ Ciclop 3D Scanner Review explains and points, this is the prime free reference scanner for 3D printing available. The scanner also uses Horus software what you can download online.

The scanner accomplishes a ZUM BT-328 board based off the Arduino, and it comes with several features and modifications that make it preferred to the new boards available today. Also, it is the ZUM BT-328 that runs the laser and motor control firmware.

ciclop 3d scanner review

The power supply is exhibited with an adaptor for use in the US. The adaptor is a bit large, but otherwise, it is standard. The electronics chamber is well-designed and the clips that install the circuitry are permanent.

Conclusion BQ Ciclop 3D Scanner Review

As this BQ Ciclop 3D Scanner Review shows, the Ciclop is an outstanding product. It works as advertised, and it gets the job completed. It’s difficult enough to find a reliable 3D scanner presently that’s economical, but this one is and easy to use at that. For those reasons, we give it our highest recommendation.

[youtube https://www.youtube.com/watch?v=DpR5bwA7BjY]

Posted on

DAVID SLS-3 3D Scanner Review

The latest DAVID SLS-3 3D Scanner operates the innovative structured light technology, which provides precise 3D scanning in a material of seconds. The 3D colour scanner is mobile and can be arranged quickly in front of the covering to be scanned. A unique click in the well-proven DAVID software starts the scan – and several seconds later the digitised 3D design shows up on your cover!

DAVID SLS-3 3D Scanner – the portable design of the scanner facilitates proper and expeditious surface scanning small and big objects, even those that are not suitable for transport. High degree, automation, and simple operation produce the user encouragement. Using the device does not require an intricate, specialised assistance.

The 3D scanning method starts one button, and several seconds later a 3D model seems on the screen and can be transshipped to standard file formats such as OBJ, STL, and PLY, and processed in other applications.The scanner is transportable and can be located quickly in front of the surface to be scanned.

DAVID SLS-3 3D Scanner

An only click in the well proven DAVID software starts the scanning process and a few seconds later the digitised 3D model resembles on the screen – even the colours of the object can be optionally apprehended and reproduced in the resulting scan!

This way you can subsequently examine all surfaces of the object, and ultimately, combine them through a closed 360° model. The modular hardware setup allows a resilient adaptation to your object – any size from a coin to the couch is imaginable!

[youtube https://www.youtube.com/watch?v=1ptq9I-DT3I]

The results can be exported into universal 3D file formats (OBJ, STL, PLY) and prepared in other applications, e.g. for rapid prototyping, manoeuvres, result presentations, archaeology and cultural inheritance, works of art, computer animations, video games.

Laser Scanning: What is SL?

SL 3D scanning, contrarily known as Structured Light, is a indicates scanning objects using a projected lined pattern from a projector and reading the result using a camera. The DAVID SLS-3 3D Scanner comes with all the tools needed to perform these scans outwardly the necessity of any additional hardware or software.

SL works by pulsing a sequence of light designs at the object and building a screen from this. In association to the Starter Kit which involves painting a laser over an object’s surface, there’s a huge bound in time-saving and ease of use. That meaning published, setup time initially, for those new to 3D scanning, can be somewhat slow. But once you polish the process you would be available to scan an object within 5 to 10mins.

[youtube https://www.youtube.com/watch?v=OunzmgYCdag]

That meaning published, setup time initially, for those new to 3D scanning, can be somewhat slow. But once you polish the process you would be available to scan an object within 5 to 10mins.

DAVID SLS-3 3D Scanner

The hardware incorporated to do the SL scanning is extraordinary. An Acer K11 projector, high-quality camera, Hahnel great adjustable tripod, two calibration studios and the DAVID software on a USB tool.

 

You can do polygon decimation in Blender or other 3D software as the results are too detailed to use in SketchUp and basic 3D software.

The DAVID SLS-3 3D Scanner

The DAVID SLS-3 3D Scanner, as discussed takes some time to setup, but you are supplemented through the process with a supplied User Guide. The hardware assembly is outspoken, and the only real head scratchy comes when you have to do a bit of mechanical measuring of objects and measures between projectors, cameras, and objects.

DAVID SLS-3 3D Scanner

Once you are ready, the DAVID scanning software resembles after most everything. Projector and camera calibration fit with centre rings and opening perspectives, but it takes continued to type that decision.

While all is turned in you can start the scanning method. It isn’t sufficient to do other than click scan and twist your object on completion. For a full 360 degrees scan, I found anything between 8 to 12 rotations gave the best results.

To take your series of scans and consolidate them into one mesh the DAVID software has a system called ‘Fusion’ which will automatically adjust and improve any holes in the scanned screen and export the decision to either .obj, ply or STL. Ideal if you plan to go the 3D print management.

You can also prefer to export each scan independently to do additional work in applications of your selection. A different element to ‘Fusion’ is that it can more apprehend arrangements and implement these to the scanned meshes.

I did play with this moderately on distinct objects with mixed results. It is not flawed, but when administering with lighting and reflections, it can get intermittent with noticeable changes in textures from scan to scan.

Outstanding value for money

3D scanners cost many thousand of the euro? Not anymore! David-SLS-2 is a full 3D scanner that is capable of digitising tiny to large objects in stunning detail – and at an unbeatable price!

Highly flexible design

[youtube https://www.youtube.com/watch?v=tvSa7iEgNvY]

The scanner can easily be adapted to different object sizes and levels of precision. In combination with a laptop, this robust and light hardware forms a highly mobile scanning platform.

The structured light technique does not require moving mechanical components, making the scanner low-cost and wear-free.

Very easy to use

[youtube https://www.youtube.com/watch?v=NNSlEO6bSCA]

After the scanner has held calibrated for the suitable object size using the enclosed calibration panels, each scan can be inaugurated with only a single mouse click. The software immediately generates the 3D data and displays it in the 3D viewer.

This releases it easy to scan and save different views of the object in succession – 360°, top and bottom views and occluded areas.

Post-editing made easy

Only a few clicks are required to retouch, align and fuse the scan together to create a watertight 360° model that can then be saved in widely used CAD formats (OBJ, STL, PLY) and imported into most 3D programs.

The 3D data is to scale in mm and is thus suitable for making measurements and comparisons as well as for 3D printing or CNC milling.

Specifications DAVID SLS-3 3D Scanner

  • Scan size: 60-500 mm.
  • Presentation/Precision: Up to 0,1% of scan size (down to 0,06 mm).
  • Scanning time: One single scan in a few moments.
  • Mesh thickness: Up to 1,200,000 vertices per scan.
  • Export arrangements: OBJ, STL, PLY.

Requirements

Two available USB ports.

Recommended

  • Dual-core 2 GHz CPU.
  • 64 bit Windows.
  • 8 GB usage memory.
  • 3d graphics card with 1 GB RAM or more.

Contents

  • Manufacturing camera with high-quality lens.
  • Video projector with particular lens for large focal range, including remote control.
  • USB drive with DAVID-4-PRO software.
  • Sliding rail (aluminium).
  • Camera slider.
  • High-quality platform.
  • Calibration panels printed on both sides for multiple scan volumes.
  • Written instructions.
  • All required connecting cables.
  • Adapters for power supply in over 150 countries.
  • Cable straps.

The Verdict DAVID SLS-3 3D Scanner

Pros

  • Quick.
  • Accurate.
  • Ease of Use.

Cons

The software can malfunction at moments.

Conclusion DAVID SLS-3 3D Scanner

Overall, the scanning and screen tools in the DAVD software are excellent. It caters for someone that wants to grab a quick scan all the way up to highly detailed scans.

Regarding accuracy and speed, the DAVID SLS-3 3D Scanner is a crowd pleaser. The build quality is tremendous, and the bundled software gets the job done.

[youtube https://www.youtube.com/watch?v=ZN9LKIT95wM]

Posted on

MakerBot 3D Scanner (MakerBot Digitizer) Review

The MakerBot 3D Scanner or MakerBot Digitizer Desktop 3D Scanner from MakerBot permits:

  • To scan your 3D object.
  • To send the 3D file directly to your PC.
Makerbot 3D Scanner
Makerbot 3D Scanner

When you have digitized the 3D figure with the MakerBot 3D Scanner you want to manage with, you’ll be able to modify, multiply, develop, and share it for 3D printing.

The MakerBot 3D Scanner or MakerBot Digitizer is optimized to accomplish that with the MakerBot Replicator Desktop 3D printers, MakerBot MakerWare, and Thingiverse.

Using MakerBot MultiScan Technology, the MakerBot Digitizer enables you to check out stuff from multiple angles to get the cover, bottom, and the hidden parts of your 3D object. With 200k triangles on a single 3D matter, you can also “blend” all the varying perspectives into one 3D model for excellent efficiency.

MakerBot MultiScan Technology

MakerBot MultiScan Technology enables you to check and scan anything from several sides to capture the all different parts and sides that you have to check. You can after that “merge” them unitedly to create a high-quality 3D model.

[youtube https://www.youtube.com/watch?v=gUOs3IjJSd8]

Optimized for 3D Printing

Makerbot 3D Scanner
Makerbot 3D Scanner

With two just to steps, the MakerBot 3D Scanner or MakerBot Digitizer as a beginner device yet advanced software program you can create full 3D prints ready for 3D printing.

MakerBot optimized the whole method to work quickly with MakerBot Replicator Desktop 3D printers. Nevertheless, the MakerBot 3D Scanner or MakerBot Digitizer provides regular style files.

Therefore, you can use them on the 3D printer of your selection. You no longer require any design or 3D modeling skills to start, and it all appears in minutes.

Transform your World

Makerbot 3D Scanner
Makerbot 3D Scanner

Find things skeptically. When you examine a simple thing, you provide it a name life in the digital world most recent.

The MakerBot Digitizer Desktop 3D Scanning device is making standard 3D file formats to ensure that you can change, shape, form, twist, animated, and transform objects in a third-party 3D modeling program.

MakerWare for Digitizer

Makerbot 3D Scanner
Makerbot 3D Scanner

Behind the two-click uniformity is a complicated and compelling reconstruction approach.

There is no any adjustments necessary during the scanning process so you can proceed to the next production process in a matter of minutes.

MakerWare, the software used for MakerBot 3D Scanner Digitizer includes an algorithm that combines hundreds of thousands of points in a seamless digital mesh in an instant.

Makerbot 3D Scanner Features

  • Storage temperature: 32-90 f.
  • Operating temperature: 60-90 f.
  • AC input: 100-240 v, ~2 amps, 50-60 Hz.
  • Power requirements: 12 v dc @ 2.08 amps.
  • Scan volume: 8×8 diam and 20.3 height.
  • Dimensional accuracy: 0.079 in – 2mm.
  • Detail quality: 0.0197 in (0.5 mm).
  • Polygon count definition: 200k.
  • Scan speed: 10 minutes.
  • Measures per rotation: 800 per rotation.
  • Optimal light conditions: artificial in-house light.
  • Max weight allowed in the little turntable: 6.6 lbs.
  • Included software: MakerWare for Digitizer.
  • Exported data types: STL, thing.
  • OS: Linux and Windows.
  • Lasers: two safe laser beam generators.
  • Camera: 1.3 megapixels CMOS picture sensor.
  • Enclosure Materials: ABS.
  • Connection: USB.
  • Engine: 0.9 step angle with 1/16 micro stepping.
  • 3D Scanner Dimensions and Weight: 18.7 x 16.2 x 8.0 in and 4.7lbs.
  • Package Dimensions and Weight: 20.5 x 18.5 x 9.6 in and 11.0lbs.

Helps your design process

Makerbot 3D Scanner
Makerbot 3D Scanner

The MakerBot Digitizer starts the process of the 3D job object with of tens of myriads of points and aspects.

Many 3D modeling applications let you move these valid points and issues to remodel your object into something new. You can connect distinct models also, trim them into items, or subtract material from your model.

3D scanning with the Makerbot 3D Scanner or MakerBot Digitizer is a perfect method to get started on a 3D design process without having to start from damage, whether you are developing a prototype of a different product or a new 3D model to talk about online.

Quick and straightforward to use

The MakerBot Digitizer is an excellent tool for doing a medium-quality, 3D-printable model and getting scans of things up to 8” diameter x 8” high. The MakerBot Digitizer is usually also a desktop 3D scanning device and displays balance and correctness in a fast and easy-to-use system that is compatible with MakerBot and new Stratasys 3D printers.

Revise Your Object

Makerbot 3D Scanner
Makerbot 3D Scanner

The MakerBot Digitizer or MakerBot 3D Scanner outcomes standard 3D file formats to ensure that you can change, shape, mildew, twist, animate, and reconstruct objects in a third-party 3D modeling program. The document you obtain from your scan is usually the starting point.

Modifying a 3D model is available by using third party software like MakerBot Thingiverse and third-party software program, such as MeshMixer. You can also calibrate your 3D model down to organize short pieces in MakerWare for Digitizer.

Pixologic ZBrush 4R7 for Windows Single-user Commercial LicensePixologic ZBrush 4R7
Geomagic Design
Geomagic Design

If you want to make exceptional adjustments to your 3D design just, you’ll be capable of sculpting it according to your choice with a third-party modeling application, such as Geomagic or ZBrush.

Advanced Software

3D Systems 355000 Touch D Stylus
3D Systems 355000 Touch D Stylus

Pursuing the two-click simplicity can be a challenging and active renovation practice. MakerWare for Digitizer contains a criterion that combines hundreds of hundreds of moments into a smooth digital fine mesh in simply mere seconds.

There’s simply no patching, stitching, or fixing expected so that you can skip to your productive process straight. We’ve worked hard to make software that sustains your period.

3D printable scanned input

The MakerBot Digitizer allows 3D models that accommodate almost 200,000 triangles. The 3D versions are watertight, meaning they perform not have openings in lacking data, and the software program removes run away data that is not a component of your object automatically.

Designers, teachers, and performers can use the MakerBot Digitizer tests as starting circumstances in their 3D creation procedure.

[youtube https://www.youtube.com/watch?v=xfhVWkbGdV0]

Key Features & Benefits

  • Unfasten your creativeness with the MakerBot Digitizer Desktop 3D Scanning device.
  • Create, scan, and participate your final own 3D versions.
  • Have pleasure scanning services and share what you love.
  • Zero 3D modeling experience is necessary to start creating awesome 3D stuff.
  • Optimized for MakerBot Replicator® Desktop 3D MakerBot Printers and Thingiverse®.
    Makerbot.

Conclusion Makerbot 3D Scanner Digitizer Review

Overall, the MakerBot Digitizer is an exceptional product for customers, yet lacks some of the features of other 3D scanners on our list. The most distinctive feature is its ease of use, not its scanning abilities. Originally $1,400, the Digitizer can be bought for around $750 through some retailers.

For enthusiasts, the hope is that Makerbot will publish a new version of the Digitizer on the agenda. Its simplicity in scanning could be the starting point of a product that, with developments, could take the purchaser and entry-level market for its own.

[youtube https://www.youtube.com/watch?v=3qsT5XqIkOs]

Posted on

3D Printer Kit

The 3D printing technology originated in 1986 but got popular in 1990. In the past years, this amazing technology came out of the phase of manufacturing and engineering and has gone more in the industrial use or home use with 3D printer kit. Also, it is more important in the designing and marketing world these days. You can develop 3D object in just a few hours with a 3D printer kit. Another name of this technology is additive manufacturing.

Benefits of 3D printer kits

The benefits of 3D printer kits make this technology ever best. some benefits are:

  • Ability to print different structures and shapes. The 3D printing technology allows you to print all the sorts of shapes you want. Unlike traditional process, you do not have to depend on the cutting and molding features. You can create anything that you have imagined with more structure strength. It works in a way that it takes the practical designs, converts them into flat models, and then develops layers of the model until it made.
  • You can use different materials together. When you use traditional process, you are not allowed to combine different materials because of the high cost and stubborn physical properties that make it impossible to mix different raw materials. The technology of 3D printing is based on plastic and therefore with this, you can combine several raw materials together. Many companies now provide different finishes made out of a combination of the various raw materials.
  • No or less wastage. The best benefit of this technology is that there is minimal waste. Typically, the process of making plastic and metal objects includes many lost materials. However, with additive manufacturing, there is less consumption of energy and hence less waste.
  • You can also create other things with 3D printing, and those are jewelry, footwear, and many other things.
  • The finished object is very much lighter in comparison with products made by machine, and this helps you save money on the costs. The manufacturing is less costly. The technology of 3D printing helps the companies save a considerable amount of cost reducing 80 percent of their entire production cost. Companies achieve that value by the reduced packaging and shipping costs related to less costly raw materials. Overall, it makes the companies earn more and more revenues.
  • The production gets faster and faster. The speed of 3D printing is faster than the traditional printing methods. With 3D printer kits, you get the advantage of creating objects many times faster, and this saves the time and money. Within just a few hours, your object is printed and that even in the perfect condition. This means more and more production at a faster pace. The faster production makes it easier for you to make more and more models and helping you with the better productivity.

The benefits of this equipment are innumerable and invaluable and definitely, become a reason for your gain in the future.

Benefits 3D Printing infographic
Benefits 3D Printing infographic